If you are experiencing problems with your Braun coffee maker, such as it not brewing properly, you may need to reset it.
Afshin Roshanian will let you know the best answer for the question how to reset Braun coffee maker and why is Braun coffee maker not brewing.
Follow these simple steps and your machine should be up and running again in no time!
Here we go.
How to Reset Braun Coffee Maker?
Turning off your coffee maker
If your coffee maker has stopped brewing your coffee and you can’t figure out why to try turning it off and then back on again. The reset button is located inside the water reservoir (the large area where water sits). Check that all of its screws are tight.
Remove the filter basket
Make sure to remove and discard any filters in your coffee maker. They may be either metal or plastic, but they will look very similar so it’s important to carefully inspect both sides. You should find a small handle, which you must pull in order to remove it from its slot.
Press Cancel on the control panel
If your coffee maker is blinking with an error message, and you can’t figure out how to reset it, try pressing the Cancel button on the control panel. You might be surprised to find that your coffee machine goes back into ready mode and starts brewing again! Just make sure your carafe has fresh water in it before brewing begins again. If you don’t press Cancel and there’s no brew button or if pressing cancel doesn’t solve your problem, move on to step two below.
Wait for 2 minutes
If you have a clogged coffee machine, resetting it will unblock the machine and remove any unusual smells. This process is easy and only takes two minutes of your time. Be sure to follow these steps carefully so you don’t damage your machine.
Turn on your Braun coffee maker by pressing Start
Before troubleshooting your coffee maker, ensure that it is plugged in and turned on by pressing the Start button. If nothing happens when you press Start, check to see if your coffee maker is unplugged. If so, plug it in and turn it on again using the Start button.
How do I get my Braun coffee machine out of clean mode?
There are a few ways to get your Braun coffee maker out of the cleaning mode.
- Press the “clean” button and wait for the machine to finish cleaning.
- Remove the water tank and pour out all of the water.
- Remove the coffee filter and discard it.
- Remove the drip tray and discard it.
Why is Braun coffee maker not brewing?
The most common reason a Braun coffee maker won’t brew is that the water reservoir is empty. To fix this issue, you will need to fill the water reservoir with fresh water. If the machine still doesn’t work, it may be because there’s something blocking the coffee filter.
What do you do when your coffee maker stops working?
If your coffee maker is not working, there are a few things you can do to try and fix the issue. You can check to see if the problem is with the machine itself or if something is wrong with the wiring. If that doesn’t work, you may need to replace it.
Braun Coffee Maker Troubleshooting
Problem 1: Braun Coffee Maker Won’t Brew
If your Braun coffee maker isn’t brewing, there may be some simple solutions. First, check to see if the water tubes are clogged. If that doesn’t work, try cleaning out the water reservoir and checking for any hardware failures.
Problem 2: Braun Coffee Maker Power Button Flashing
A flashing power button may indicate an internal fault, or it could be activated if the T-Disc is missing or damaged.
Problem 3: Braun Coffee Maker Stuck on Clean
If your coffee maker does not go off after running a cleaning cycle, it may be because there is calcium buildup inside the machine. As such, one descaling cycle may not be enough to clean it.
Problem 4: Auto Mode is Not Working
If the bar code reader fails to read the T-DISC label, this may cause the Auto mode to malfunction.
Problem 5: Braun Coffee Maker Won’t Start
If your coffee maker does not start, there may be a problem with the power supply or the cable connecting the machine to the power outlet.
F.A.Q How to reset Braun coffee maker?
How do I clear the error on my Braun coffee maker?
If the error persists after turning off and on the water tank, you may need to remove it again and reattach it properly.
Why is my Braun coffee maker not brewing?
Make sure the machine has been descaled and that when inserting the carafe, the lid is on properly and the bump on the lid is touching the tab on top of filter holder pushing it up so it is open to drip water.
How do you clear an E13 on a Braun coffee maker?
If the carafe is full of ice, and you choose a hot coffee drink, this will prevent the heating plate from reaching its optimal temperature and the E13 error will appear. To clear this error from your display, unplug the unit and let it sit idle for 5-10 minutes.
How do I fix E21 error on Braun coffee maker?
If you are experiencing an E21 message, it means your water tank is not full or has not had enough time to cool down. It is important to either ensure the water tank is full or have enough water for the selected drink size. If this still does not resolve the issue, please contact Braun Customer Service.
If you’re having trouble resetting your Braun coffee maker, don’t worry. We’re here to help you.
In this article, we walked you through the process of how to reset a Braun coffee maker step-by-step. And if that still doesn’t work, we provide troubleshooting tips for when things go wrong. So whether you’re just getting started with your Braun coffee maker or you’ve been using it for years, we hope this article will be helpful.
Thanks for reading!